Rhino Shine Ultra – For that Fresh New Rhino Lined Look
Rhino Shine works well because it treats the surface where any UV damage is occurring. It is available in five colours – graphite, flame red, emerald green, indigo blue and black – making it a great alternative to the UV Top coats.
Rhino Shine Ultra also comes in a clear coat that will add shine to any ute liner.
APPLYING RHINO SHINE ULTRA
Successfully applying Rhino Shine Ultra can be accomplished in these three easy steps:
- Clean the existing Rhino Lining – sweep or blow out all the big stuff, then scan the tray for oils, grease and wax spots. Remove any remaining contaminants using a cleaner or degreaser.
- Tape and mask off all the edges – you want to avoid getting Rhino Shine on painted areas, as it will stick and leave marks. We use masking tape to mask along the rail (if applying over the rail) and in the tailgate areas. You can skip taping and be extra careful with the paintbrush, but it really only takes a few minutes to tape off the perimeter of the truck bed. These extra few minutes will actually allow you to apply Rhino Shine faster and greatly reduce the change of “colouring outside the lines” 😉
- Brush or spray Rhino Shine Ultra on bed liner – the Rhino Shine is best applied with a paintbrush (or a HVLP spray gun if you have one). Avoid applying in direct sunlight. Whether you spray or brush it on, coat the three walls first, then make your way backward down the floor and finish with the tailgate.
With one 16oz bottle, you would be able to cover one ute.
Rhino Shine dries quickly, although cold temperatures or high humidity will affect your drying times. It’s still much faster than the UV Top Coats which can take hours to dry, plus the liner will retain much of its non-side surface.
Rhino Shine Ultra ready does bring an old Rhino back to like-new condition.
